5 Communication via BEST SOFTWARE
• PC / mobile device
– equipped with the operating system Windows 7 or
newer
– with Bluetooth interface or USB port
– with BEST SOFTWARE installed
The BEST SOFTWARE can be downloaded for
free from the BITZER website (www.bitzer.de).
• For communication via the USB port:
– Plug the BEST interface converter into the com-
pressor module (CN14) and the PC / mobile
device.
Setting up communication
• Switch the PC / mobile device on and start the
BEST SOFTWARE (1).
• Click the N
button (2).
EW
• Select IQ MODULE CM-RC-01 (3).
• Click the C
button (4).
ONNECT
The following selection appears: B
or B
.
VERTER
LUETOOTH
• If you select B
EST INTERFACE CONVERTER
Click the C
button.
ONNECT
The compressor module is now connected to the
PC / mobile device.
Fig. 1: Connecting the CM-RC-01 to the BEST SOFTWARE
• Select FIRMWARE UPDATE (1) and B
(see figure 2, page 16).
• Browse the folder (...\BEST\Firmware\CM-RC-01) to
find new firmware.
16
• Start firmware update and wait until successful up-
Fig. 2: Updating the firmware
• If you select B
-
• Select IQ MODULE CM-RC-01.
EST INTERFACE CON
• Click the C
:
• Enter Bluetooth password. Factory setting from firm-
The C
window. The compressor module is now connected to
the mobile device.
5.1 Configuration via BEST SOFTWARE
Configuration via BEST SOFTWARE (see figure 3,
page 17)
At least the following parameters need to be set / selec-
ted in the C
• Compressor type.
• Refrigerants.
(2)
ROWSE
• Motor starter function.
• Serial number of the compressor.
date is confirmed. Click OK to confirm (3).
LUETOOTH
Bluetooth not possible!):
A list of all available devices appears.
button.
ONNECT
ware version 2.6.58.00 on: "8670", previous ver-
sions: "2"
menu appears with the M
ONFIGURATION
Information
For further information on operating parameter
monitoring, electrical connection and communic-
ation via BEST SOFTWARE, see Technical In-
formation KT-230.
menu:
ONFIGURATION
(firmware update via
S
AIN
ETUP
KW-232-1