Bitzer CM-RC-01 Instructions De Montage page 15

If no additional extension kits are mounted:
• Proceed with the other electrical connections on the
CM-RC-01 (see chapter Further electrical connec-
tions on the CM-RC-01, page 8).
• Screw the protective earth conductor onto the ter-
minal box cover and attach the cover to the module
housing (see chapter Screwing the cover onto the
module housing, page 8).
• Lay the cables and close the cable ties (see chapter
Laying the cables, page 9).
KW-232-1
• Use the enclosed spacer washers, screws
and nuts (see small figure) to fasten the fan
feet.
• Pass the cables through the cable glands on
the compressor module into the module hous-
ing and connect them to the CN5 terminal
strip.
15