Mounting The "Additional Fan" Extension Kit - Bitzer CM-RC-01 Instructions De Montage

If no additional extension kits are mounted:
• Proceed with the other electrical connections on the
CM-RC-01 (see chapter Further electrical connec-
tions on the CM-RC-01, page 8).
• Screw the protective earth conductor onto the ter-
minal box cover and attach the cover to the module
housing (see chapter Screwing the cover onto the
module housing, page 8).
• Lay the cables and close the cable ties (see chapter
Laying the cables, page 9).
14
• Shorten the cables as needed, pass them
through the cable glands on the compressor
module into the module housing and connect
them to the CN6 terminal strip.

4.4 Mounting the "Additional fan" extension kit

NOTICE
!
!
When mounted, the additional fan hides the lift-
ing eyes of the compressor!
The lifting eyes cannot be used for lifting the
compressor when the additional fan is installed.
Do not mount the additional fan before installing
the compressor in the system!
Information
For details, see Technical Information KT-140.
• Loosen the relevant screws on the cylinder
head, fit the fixing plates and screw tight
(tightening torque 80 Nm).
KW-232-1