User Interface; Hardware Buttons; Safety Key; Software Buttons - Tunturi Platinum PRO Mode D'emploi

User interface

Hardware buttons

Energy efficient:
Pressing Energy efficient button will
wakes up console when being in
stand by mode. ( See "settings/ Power
Management" for more details )
Connectors:
Display is equipped with 2 x 3,5 mm jack
sockets.
Right hand Jack near USB is for Line out
Left hand side Jack is for Line in
Display is equipped with 3 USB sockets
for storage device connection.
The USB socket can only read FAT32
formated format.
Remark:
FAT32 environment is limited to 4GB file
size.

Safety Key

A safety key is provided with this unit. It
is a simple magnetic design that should
be used at all times. It is for your safety
should you fall or move too far back on
the running belt.
Pulling this safety key will stop running
belt movement.
To Use:
• Place the magnet into position on the
console control head. Your treadmill
will not start and operate without this.
12
• Fasten the plastic clip onto your
clothing securely to assure good
holding power. Note: The magnet has
strong enough power to minimize
accidental, unexpected stopping.
The clip should be attached securely
to make certain it does not come
off. Be familiar with its function and
limitations. The treadmill will stop,
depending on speed, with a one to
two step coast anytime the magnet
is pulled off the console. Use the
red Stop / Pause switch in normal
operation.
•

Software Buttons

Software buttons:
Remark:
Only buttons shown bright can be used
for its function. When buttons are in grey
shade, the button option is not active.
Back
Go back to former window without
saving changes.
OK
Confirm setting/ save change and go to
next screen.
Cancel
Clear changed data without saving
change.
Scroll
Use arrows Left-Right/ Up-Down to
see more selectable items than can be
shown in main window.
Data change
Upper or lower the data value.
Software key pad
show software key pad when available.