Assembly; Step 1 - Tunturi Platinum PRO Mode D'emploi

Assembly

Step 1:

Upright Tubes
• The right side upright tube (19) has
the computer cable (A) pre installed.
Lift the tube off the walking surface
and attach it to the base frame. You
need to gently pull on the computer
cable as you line u the upright tube,
taking the slack out, so the cable
does not get pinched between the
tube and the base frame. Assemble
one 3/8" x 3-3/4" Button Head Socket
8
bolt (104), 3/8" split washer (58)
and 3/8" 1. flat washer (59) and 10"
nylon washer (153) through the top
hole in the retaining plate (21), and
corresponding top hole in the upright
tube, and screw into the base frame.
Now install the other two bolts (104)
and washers (58 & 59 & 153) and
tighten all three hand tight fixed
• Install the left upright (18) in the
same manner, but without 10" nylon
washer (153)
58 58
59 59
104
153
Split washer Split washer
Flat washer Flat washer
Button head
socket bold.
Nylon washer.