Important Electrical Information; Circuit Breakers; Grounding Instructions - Tunturi Platinum PRO Mode D'emploi

authorized under the laws of the
country in question to carry out
maintenance and repair work.
• Never drop or insert any object into
any openings.
• Do not use outdoors.
• Do not use excessive pressure
on console control keys. They are
precision set to properly function with
little finger pressure. Pushing harder
is not going to make the unit go faster
or slower. If you feel the buttons are
not functioning properly with normal
pressure, contact your dealer.
SAVE THIS INSTRUCTION MANUAL

Important Electrical Information

NOTE:
NEVER use a RCD - Residual Current
Device (U.S. ver.= GFCI) - wall
outlet with this treadmill. As with any
appliance with a large motor, the RCD/
GFCI will trip often. Route the power
mains cord away from any moving part
of the treadmill including the elevation
mechanism and transport wheels.
NOTE:
NEVER remove any cover without first
disconnecting AC power. If voltage
varies by ten percent (10%) or more,
the performance of your treadmill may
be affected. Such conditions are not
covered under your warranty. If you
suspect the voltage is low, contact your
local power company or a licensed
electrician for proper testing.
NOTE:
NEVER expose this treadmill to rain
or moisture. This product is NOT
designed for use outdoors, near
a pool or spa, or in any other high
humidity environment. The temperature
specification is 40 degrees c, and
humidity is 95%, non condensing (no
water drops forming on surfaces).
O w n e r ' s m a n u a l

Circuit breakers

Some circuit breakers used in homes
are not rated for high inrush currents
that can occur when a treadmill is first
turned on or even during normal use.
If your treadmill is tripping the circuit
breaker (even though it is the proper
current rating and the treadmill is the
only appliance on the circuit) but the
circuit breaker on the treadmill itself does
not trip, you will need to replace the
breaker with a high inrush type. This is
not a warranty defect. This is a condition
we as a manufacture have no ability to
control. This part is available through
most electrical supply stores

Grounding Instructions

This product must be grounded. If the
treadmill's electrical system should
malfunction or breakdown grounding
provides a path of least resistance for
electric current, reducing the risk of
electric shock. This product is equipped
with a cord having an equipment-
grounding plug. The plug must be
plugged into an appropriate outlet that
is properly installed and grounded in
accordance with all local codes and
ordinances.
NOTE:
Improper connection of the equipment-
grounding conductor can result in a risk
of electric shock. Check with a
qualified electrician or serviceman if
you are in doubt as to whether the
product is properly grounded. Do not
modify the plug provided with the
product if it will not fit the outlet; have
a proper outlet installed by a qualified
electrician.
GB
•
P L A T I N U M P R O
5