Moving And Storage - Tunturi Platinum PRO Mode D'emploi

If you require spare parts, always
give the model, serial number of your
equipment and the spare part number
for the part you need. The spare part list
is at the back of this manual. Use only
spare parts mentioned in the spare part
list.

Moving and storage

Move the Platinum Treadmill treadmill
according to the following instructions:
turn off the power switch and unplug
the power cord from the wall and the
treadmill. Stand behind the treadmill
and take hold of the aluminium profile
at the rear end of the treadmill. Tilt the
rear end of the equipment so that it rests
on the transportation wheels, and move
the equipment by wheeling. Lower the
treadmill carefully onto the floor.
NOTE:
Transport the treadmill with extreme
caution over uneven surfaces, for
example over a step. The treadmill
should never be transported upstairs
using the wheels over the steps,
instead it must be carried. We
recommend that you use a protective
base when transporting the equipment.
The running belt needs to be realigned
and centred after moving.
To prevent malfunctioning of the
treadmill, store it in a dry place with as
little temperature variation as possible,
protected against dust. Always unplug
the treadmill from the electrical outlet
when not in use.
26