Guarantee Conditions; Ec Declaration Of Conformity - SATA jet RP Mode D'emploi

Operating instructions SATAjet RP (DIGITAL 2)

9. Guarantee conditions

During the period of twelve (12) months from the date of original purchase, SATA will
repair or replace the product without charge for parts or labour subject to the following con-
ditions. The warranty covers the value for production parts or defects in material during the
warranty period. The warranty does not include damages caused by improper handling, normal
wear and tear, mechanical damages, faulty assembly, improper maintenance, unusual spray
materials substitute materials, chemicals such as alkaline solutions and acids, electro-chemical
or electric influences, as far as this damage is not the result of any error committed by us.
Abrasive spray material such as red lead and liquid grinding material etc. reduce the lifetime
of valves, packings, guns and nozzles. Wear and tear damage caused by this are not covered
in this warranty. Units should be inspected upon delivery by the consumer. Obvious damage
must be reported within 14 days of receipt of the unit to the supplier to avoid loss of the right
to claim notice of defects.
Additional claims such as compensation are excluded. This refers as well to damages caused
during meetings , training sessions, or demonstrations.
Should the consumer require immediate repair or replacement before a determination of whe-
ther the affected unit is covered by the warranty, the repair or the replacement will be made and
charged at the current prices. If it is determind that the item is covered by the warranty, a credit
will be issued for the repair or replacement. Replaced parts become the property of SATA or
their distributor. Notice of defects or other claims do not entitle the consumer to delay or refuse
payment. Returned merchandise to SATA must be sent prepaid. All service charges, freight and
handling charges are to be paid by the consumer. The charges made will be in accordance with
the currently existing pricing. Suretyships may not prolong the warranty period. This warranty
terminates upon unauthorized inference.
Caution! When using solvents and cleaning agents based on halogenated hydrocarbons
e.g. 1.1.1-trichlorethylene and methylene chloride, chemical reactions can occur on the
aluminium cup, gun and galvanized components (small quantities of water added to 1.1.1-
trichlorethyelene produce hydrochloric acid). This can cause oxidation of the components;
in extreme cases, the reaction can be explosive. Therefore, only use solvents and cleaning
agents for your paint gun which do not contain the substances named above. You must
never use acid, alkaline solutions / lye or stripping agents for cleaning.

10. EC Declaration of Conformity

Paint spray guns made by SATA have been developed, designed and manufactured in
accordance with EC directive 98/37/EC, 94/9/EC.
The following harmonized Standards have been applied during this process: DIN EN 292,
Sicherheit von Maschinen, Geräten und Anlagen (Safety of Machines, Appliances and Sy-
stems), DIN EN 1953, DIN 31000, DIN 31001 Teil (Part) 1, BGR 500 (BGV D25), BGV D24
and, if required, ZH 1/406, ZH 1/375 and ZH 1/181.
The technical documentation is provided in full and the operating instructions for the spray
gun are supplied in the original version and in the national language of the user.
IX.10
SATA Farbspritztechnik GmbH & Co. KG
President