Whirlpool AMD 385 Mode D'emploi page 23

Malfunction
Indoor unit makes noise.
Moisture on outlet grill
In case of the following events, please contact the Whirlpool Authorized Service Centre
nearest you.
Stop the air conditioner and
pull out the power plug.
INSTALLATION SERVICE - PRECAUTIONS
ON INSTALLATION
Important Precaution
1. The air-conditioning unit must be installed
according to national wiring rules and according
to this manual by professionals;
2. Contact the local Whirlpool Service Centre or
qualified technician before installation;
3. Any change of installation position must be
handled by professionals;
4. If the supply cord is damaged, it must be
replaced by the manufacturer, its Service or
similar qualified entity in order to avoid any
hazardous situation.
Basic Requirements for Installation
Installation in the following places may cause failure
of the air-conditioning unit. Please contact
Whirlpool installation and service agency if the
installation in such places cannot be avoided.
• Environments with heat, steam, flammable or
explosive gases or volatile solvents in the air;
• Near high-frequency facilities, e.g. welding
machines, medical equipment;
• Region with high saline-sodium soil near the sea;
• Places where the air contains oil (mechanical
oil);
• Locations containing sulphide gases (such as
sulphur springs);
• Other special conditions.
• The sound comes from the fan or compressor relay switching over
(close/open).
• Air conditioner may make noise in defrost mode or when stopped due
to inverse flow of refrigerant in the unit.
• If the air conditioner is left running in high humidity, moisture may
condense on the grill and accumulate there.
• The air conditioner makes a shrill noise when running.
• Air conditioner gives out an unpleasant odor when running.
• Water leaks from the indoor unit.
• Air break switch or leakage protection switch drips frequently.
• Foreign matter or water enter the machine or remote control.
• Abnormal overheating of power cord and plug.
23
Cause
Indoor unit: Selection of Installation Position
1. The air inlet and air outlet must be far away
from obstacles to ensure that the airflow can
reach every corner of the room;
2. Choose a position where condensation water
can be easily discharged and the outdoor unit
can be easily connected;
3. Install out of the reach of children;
4. Choose a place capable of bearing the weight of
the indoor unit without increasing noise and
vibrations;
5. Ensure sufficient clearance and space for service
and maintenance; ensure the indoor unit is at
least 2.5m from the floor;
6. Choose a position at least 1 meter from any TV,
sound system or other household electric
appliances;
7. Choose a place where that the air filter can be
easily accessed;
8. Ensure the installation of indoor unit is in
conformity with the requirements of the
installation dimension drawing.
Outdoor unit: Selection of Installation
Position
1. Choose a place where the noise and air flow
from the fan will not affect neighbors, animals
or plants;