Cleaning And Maintenance; How To Clean The Air Filter - Whirlpool AMD 385 Mode D'emploi

CLEANING AND MAINTENANCE

Caution:
• Make sure to stop the unit and unplug it before cleaning your air conditioner. Otherwise you may risk
electrocution.
• Wetting of air conditioner may cause the risk of electrocution. Never wash your air conditioner.
• Solvents such as paint thinner or gasoline will damage the appearance of the air conditioner. (Use only a
soft dry or damp cloth and neutral detergent to clean the air conditioner cabinet).
• The cleaning of filter and the suction grille must be done by the professional personnel.

HOW TO CLEAN THE AIR FILTER

1. Setting the cleaning period of filter
Step 1:
Enter choose and set mode
It is time to clean the filter, when the light of "Filter " turn on.
Step 2:
Cancel the setting
Press Emergency switch to return to the standard state.
2. Take out the filter
Step 1:
Open the suction grille after pushing the two knobs as shown
by the arrow mark.
Take out the air filter according the following steps:
Step 2:
Take out the air filter from the suction grille by supporting the
air grille and lifting the air filter after
detaching the filter from the hinges.
3. Clean the air filter
Use vacuum or wash the air filter with water when the air filter is very dirty, use neutral detergent and
water. Let the filter dry naturally at shady place.
Note:
Do not clean with hot water.
Do not dry over fire.
Do not run the air conditioner without the air filter.
The suction grille must be opened by skilled personnel.
Emergency
switch
Suction
grille
20
Filter
Knob
Hinges
Hinges