Whirlpool AMD 385 Mode D'emploi page 14

MODE AND FUNCTION DESCRIPTIONS
6th SENSE MODE
Press the button, the unit enters 6th sense
mode directly regardless of the unit is on or off.
In this mode, temperature and fan speed are
automatically set based on the actual room
temperature.
Operation mode and temperature are
determined by indoor temperature.
Heat pump models
Indoor Operation
temperature mode
Below ST-3 HEATING
ST-3 to ST+3 FAN ONLY
Over ST+3 COOLING
Button is ineffective in Jet mode.
Note: Temperature, airflow and direction are
controlled automatically in 6th sense mode.
However, a decrease or rise of up to 7°C can be
set with the remote control if you still feel
uncomfortable.
What you can do in 6th sense mode
Your feeling
Uncomfortable because of unsuitable
air flow volume.
Uncomfortable because of unsuitable
flow direction.
Setting
temperature
ST
ST
ST
button
Indoor fan speed alternates among High, Medium
and Low each time this button is pressed.
Press it once, the vertical adjustment louver swings
to change vertical airflow direction. Press it again,
swings stops. For horizontal airflow direction please
refer to the chapter "Airflow direction control".
14
adjustment procedure