Resetting The Appliance To The Factory Settings; Statistics And System Menu; Setting The Grinding Fineness; Converting The Connection For The Milk Hose (Depending On The Model) - Melitta BARISTA TS SMART Mode D'emploi

2. Navigate to the Settings> Switch-off
rinsing menu.
3. Use the arrow buttons to select Enabled
or Disabled and confirm with "menu/
ok".
4. Repeatedly select the Exit command to
exit the menu.
» The ready symbol appears on the
display.
8.7 Resetting the appliance to
the factory settings
The appliance can be reset to the factory
settings.
Information
If the appliance is reset to the factory set-
tings, all personal settings are lost, includ-
ing the settings in the My Coffee menu.
Requirement: The ready symbol appears
on the display.
1. Press the "menu/ok" button for 2 sec-
onds.
» The menu appears on the display.
2. Navigate to the Settings > Factory
settings menu.
3. Use the arrow buttons to select Reset
and confirm with "menu/ok".
4. Repeatedly select the Exit command to
exit the menu.
» The ready symbol appears on the
display.

8.8 Statistics and System menu

Statistics
The Statistics menu provides information
on the number of beverages dispensed
and for maintenance.
System
The System menu provides information
on the software version and access to the
Venting function, see „10.1 Venting the
appliance" on page 61.
Changing basic settings
8.9 Setting the grinding
fineness
The grinding fineness of the coffee beans
influences the flavour of the coffee. The
grinding fineness has been optimally set
prior to delivery.
Fig. 17: Setting the grinding fineness
1. Open the cover (11). To do this, reach
into the recess on the right of the appli-
ance and pull the cover off upwards.
2. Move the lever (12) forwards or back-
wards.
ū Backwards = grinding fineness
coarser
ū Forwards = grinding fineness finer
3. Close the cover. To do this, insert the
bottom of the cover into the appliance
and swing it up until it engages.
Information
ū If the grinding fineness is set finer, the
coffee flavour is stronger.
ū The grinding fineness is optimally set
when the coffee flows evenly out of the
outlet and a fine, dense crema appears.
8.10 Converting the connection
for the milk hose
(depending on the model)
Optionally, the milk hose can be con-
nected on the left or right side of the
spout.
12
11
55