Testing; Specification - Metrix CX 1651 Manuel De L'utilisateur

Testing

When the calibrator is used as a tester, the results of the tests (PASS/FAIL) can be used to sort the products etc.
Contacts of the relay are connected to 140-41 cable adapter's front panel using black terminals ∅ 4mm. Basic
definition of the status of the relay is performed using SETUP MENU and is valid for all test programs.

Specification

Uncertainties include long-term stability, temperature coefficient, linearity, load and line regulation and the
traceability of factory and National calibration standards. Specified accuracy is valid after one hour warm up in
o
temperature range 23 ± 2 C. Specified accuracy is one year accuracy.
Calibrator
Voltage
summary range DCV:
summary range ACV:
internal ranges:
frequency range:
Manuel de l'utilisateur
0 µV - 1000 V
1 mV – 1000 V
20 mV, 200 mV, 2 V, 20 V, 240 V, 1000 V
20 Hz to 50 kHz bellow 20 V
20 Hz to 10 kHz bellow 200 V
20 Hz to 1000 Hz bellow 1000 V
Calibrateur multifonctions CX 1651
173