Introduction - Purpose Of The Manual/Field Of Application; Warrantee (Only For Italy); Symbols And Terminology; Norms And Certifications - Arneg MPM 2 Manuel D'installation Et De Service

1. Introduction - Purpose of the manual/Field of application

This instruction manual is for the Medium Power Multisystem 2 refrigeration unit.
The unit's documentation consists of:
- Use and maintenance manual - installation and electronic unit use manual - system electric diagrams - unit
electric diagrams.
The information that follows is intended to provide instructions regarding:
- Use of the unit - technical characteristics - installation and assembly - information for personnel responsible
for use - maintenance operations.
The manual should be considered part of the unit and should be kept for as long as the unit is in place.
The manufacturer considers itself released from any responsibility in the following cases:
- Improper use of the unit - improper installation, not performed according to the instructions provided -
electrical power defects - serious deficiencies in carrying out scheduled maintenance - non-authorized
modifications or interventions - use of non-original spare parts - partial or total disregard for the instructions.
This manual must be available for the operators and personnel assigned to maintenance, so as to be
consultable at any time. In the case that it is transferred to a third-party, the manual should be provided to all
new users or owners, providing appropriate and prompt communication of such to the supplier.
In the case of damage or loss, please contact your supplier.
Note:READ THIS MANUAL CAREFULLY BEFORE USING THE UNIT
Note:Electronic devices can be hazardous to health. The norms and laws in effect must be respected
during installation and use.
All persons who use this machine must read this manual.

2. Warrantee (only for Italy)

MPM2 units are covered by a warrantee for one year, from the moment the system is inspected.
The warrantee includes labor and materials necessary to restore the unit to correct functioning for problems
that derive from manufacturing errors or defects.
The warrantee does not cover restoration operations for functioning caused by improper use of the unit, or
due to not following the indications contained in the unit's documentation, including the present Manual. In
the case that a "Technical Assistance Agreement" was signed, please refer to the same in order to determine
the fees and obligations which fall to the various parties.

3. Symbols and terminology

Hot surfaces
Danger high voltage
Danger
Note:Read carefully, and do not cover, damager, or replace the symbols indicated above

4. Norms and certifications

- All the refrigeration unit models described in the usage manual for the MPM 2 series meet the essential
requirements for safety, health, and protection required by the following European directives and laws:
- EC Directive 2006/42 on Machinery
applied EN norms: EN ISO 14121:2007; EN ISO 12100-1:2009; EN ISO 12100-2:2009;
- Directive on Electromagnetic Compatibility 2004/108/EC
applied EN norms: EN 61000-3-2:2006; EN 61000-3-12:2005; EN 61000-6-1:2007 EN 61000-6-3:2007;
- Directive on Low Voltage 2006/95/EC: applied EN norms: EN 60204-1:2006;
05060107 00 03/02/2010
Indicates hot surfaces
It is placed near mechanical parts capable of reaching temperatures high enough to cause
burns
Indicates danger due to the presence of powered parts.
It is placed where there is a risk of electrocution
Indication of generic danger
It is placed near mechanical parts that can cause mechanical or generic risks
MPM2 - Medium Power Multisystem
English
25