Safety Guidelines; Product Description; Correct Use - Amanngirrbach ceramill mindserve Mode D'emploi

1. SAFETY GUIDELINES
_ Protect the Ceramill Mindserve against direct sunlight and chemicals. Ensure that there are
no extreme fluctuations of temperature or humidity in the immediate vicinity.
_ Place the Ceramill Mindserve in a vertical position. Do not place it horizontally.
_ Do not place the Ceramill Mindserve near any type of liquids.
_ First remove the power cable before cleaning. Wipe the Ceramill Mindserve using moist cleansing tissues.
Do not use any chemical or aerosol cleaners.
_ Do not place the Ceramill Mindserve on a trolley, table, desk or any other unstable surface where
it could fall off.
_ The power cable must be connected to the correct supply voltage. Ensure that the connected supply
voltage is correct and stable.
_ Ensure that all electrical cables have been disconnected from the electricity supply to cut off all the
electrical current from the unit.
PLEASE NOTE
The Ceramill Mindserve requires an uninterrupted electricity supply to ensure interference-free
functioning. The installation site must be selected, so that a stable supply of electricity is guaranteed.
If you want to disconnect the Ceramill Mindserve from the mains, press the ON / O FF key for
5 seconds, so that the Ceramill Mindserve shuts down.
2. PRODUCT DESCRIPTION
The new Ceramill Mindserve was designed for networking several Ceramill CAD/CAM computers. The compact
unit is connected with all Ceramill CAD/CAM computers in the laboratory via a standard network connection.
Outgoing data from several workstations can be managed and secured with the aid of the Ceramill Mindserve.
3. CORRECT USE
The pre-configured Ceramill Mindserve was specially designed for networking several
Ceramill CAD/CAM computers.
AmannGirrbach AmannGirrbach
EN
13