Amanngirrbach ceramill mindserve Mode D'emploi page 15

Select the installation site, so that accidental manipulation of the connection cables can be excluded.
_ The Ceramill Mindserve should be connected to the mains using the adapter supplied.
_ Connect the network connections on the back of the Ceramill Mindserve with the existing switch and
network distributor using the black network cables included (or at least with one Class CAT 5e UTP cable).
_ The external back-up hard drive should be connected to one of the USB connections on the back of the
Ceramill Server. The external 2TB hard drive is supplied with power via the Ceramill Mindserve. Connect the
external 4TB hard drive to the mains using the adapter supplied.
_ Press the red power button on the front.
_ The blue LED flashes and the server starts. Wait approx. one minute until the blue LED lights up
continuously, the Status LED flashes and there is a single beep signal. The Ceramill Server is now started and
ready to use.
_ Register as Administrator on your computer and use the following data:
User: Administrator / Password: ceramill mall
_ The installer and manual are on the USB stick supplied.
_ Connect the network connections on the back of the Ceramill Mindserve with the existing switch and
network distributor using the black network cables included (or at least with one Class CAT 5e UTP cable).
_ Update the Ceramill software to the latest version, if necessary.
_ Start via the Start menu / All programmes / Ceramill software the Ceramill Mindserve programme and
follow the instructions on the screen.
PLEASE NOTE
First read the manual to avoid loss of data. It is not possible to merge several databases.
If you use several databases, you must decide for one or several databases on the Ceramill Mindserve.
AmannGirrbach AmannGirrbach
EN
15