Trouble Shooting; Technical Specifications - Tennant MB12004 - B1 Manuel Opérateur

Trouble Shooting

Problem
Machine does not operate
Machine operates with a wobble
or jerky motion.
Machine circuit breaker trips
continuously.

Technical specifications

A.C. motor
Rated power
Max.amp draw
Brush (rpm)
Brush (mm)
Working height (mm)
Working weight
Protection class
Belt-driven
Sound pressure level LPA
Model: B1
Tennant N.V.
Adress: Industrielaan 6, 6405 AB
P.O. Box 6, 5400 AA Uden-The Netherlands
Uden/Netherlands, 20-12-06
-----------------------------------------------------------------
Richard van de Hoogen – Technical Support Engineer
Cause
Faulty power cord.
Tripped circuit breaker
Faulty machine wiring.
Faulty motor.
.
Capacitor burned out
Soiled Pad.
Improper pad/brush for application.
Pad driver/brush not installed correctly.
Pad/brush unevenly worn.
Pad not properly centered on pad driver
Heavily soiled pad/brush
Improper pad/brush for application
Defective circuit breaker.
Worn carbon brushes in motor.
DECLERATION OF CONFORMITY FOR MACHINERY (Directive 89/392/EEC, Annex II, sub A)
Machine nr.: MB12004, MB12904
Herewith declares, on our own responsibility, that the machinery
- is in conformity with the provisions of Directive 89/392/EEC, 73/23/EWG and 89/336/EWG
- The following standards and normative documents have been applied:
EN 60335-1 (ed.3);am1;am2, 60334-2-67(ed2);am1, EN60355-1:94+A1:96+A12:96+A13:98+A14:
98+A15:00+A2:00+A16:01,EN60355-2-67:98+A1:00, EMC:CISPR 14-1:00+A1:01,CISPR 14-2:01,
ICE61000-3-2:00,IEC61000-3-3:94+A1:01,EN55014-1:00+A1:01,EN 55014-2:97+A1:01,
EN61000-3-2:00, EN 61000-3-3:95+A1:01
Home Find...
Solution
Contact Service Center.
Wait 10 min. till machine cooled down and try again.
Contact Service Center
Contact Service Center
Contact Service Center
Replace Pad
Change to proper pad/brush
Remove and reinstall pad driver/brush
Replace pad/brush
Remove and reinstall pad driver
Clean or replace pad/brush
Change to proper pad/brush
Contact Service Center
Contact Service Center
B1
230 V: 50 Hz
1500 W
8,3 A
1100
510
250
46 kg
lPx0
x
67db (A)
6
Go To..
EN