B1
Single disc machine
Machine component
1 - Handle bar
2 - Brush motor switch
3 - Housing of top shaft element
4 - Swith lock
5 - Shaft adjustment handle
7 - Bar
8 - Cable hook
9 - Wheels
TABLE OF CONTENTS
Parts list................................................
PROTECT THE ENVIRONMENT
Please dispose of packaging materials
and old machine components in a safe
environmentally way according to your
local waste disposal regulations.
Always remember to recycle.
Safety instructions
WARNING: This manual must be read and
understood before operating or servicing machine.
This machine is intended for commercial use. It's designed exclusively
to burnish hard floors in an indoor environment and is not constructed
for any other use. Only use recommended pads/brushes and cleaning
agents.
These operating instructions are intended for operating staff.
1. Please familiarize yourself with the instructions and recommenda-
tions contained in these operating instructions before setting up,
operating and servicing the machine.
2. You will then have full control over the machine and use it effi-
ciently. The care and maintenance described in these operating in-
structions are in the interests of your own safety and preserve the
machine's value.
3. The manufacturer accepts no liability for personal injury or damage
to property due to the incorrect use of this machine.
This warning alert symbol that is used
throughout this manual is to warn of hazards or un
10 - Motor head
11 - Front wheels
12 - Pressing force regulator
14 - Overload indicator
15 - Buffer
16 - Shaft adjustment unit
17 - Drive plate for pads
2
3
3
4
5
5
6
6
15
- 3 -
Home
Find...
Go To..
Accessories
Spray unit
n/s Suction ring
Vacuum unit
Filter bag
safe practices. Failure to follow these may cause
electric shock, fire or explosion which could result
in severe personal injury or death.
Before operating the single-disc machine,
please read these instructions carefully and keep
them handy at all times.
The single-disc machine may only be used by per-
sons trained in its use and explicitly entrusted with
its operation.
WARNING:
Fire or Explosion Hazard. Never use flammable liq-
uids or operate machine in or near flammable liq-
uids, vapours or combustible dusts.
This machine is not equipped with an explosion
proof motor. The electric motor will spark when
powered on which could cause a flash fire or explo-
sion if machine is used in an area where flammable
vapours/liquids or combustible dusts are present.
WARNING:
Electrical Hazard. Never operate machine with dam-
aged power supply cable. Do not modify plug. Un-
plug cable before servicing machine.
If the power supply cable is damaged or broken, it
must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to
avoid a hazard.
General remarks
The operation of the single-disc machine is subject to the currently
valid national regulations.
It is essential to observe not only the operating instructions and the
binding regulations on accident prevention valid in the country of use,
but also the generally acknowledged rules for safe and correct working
procedures. No methods involving safety risks must be used.
EN
Part. No.
9002262
9002287
9002288
9002195