Technical Data; Transportation And Storage - Güde GSS 700P Mode D'emploi Original

3

Technical Data

Power connection
Frequency/Protection type
Max. output P
1
Motor speed
Approximate Grinding wheel
diameter:
Grinding wheel setting angle
Supporting bench setting angle :
Saw disc clamping adapter :
Connection cable:
Approximate weight
Acoustic output level :
Dimension L x W x H (mm):
Ordering No. .:
4

Transportation and Storage

The unit has been designed for stationary use only.
Any tools that are not routinely used should be stored in a dry locked room.
5 Assembly and Initial Operation
The unit is delivered assembled. It only needs to unpack.
•
Wipe metal parts of the slide regularly with an oil-soaked cloth and lubricate the spindle before every
use.
5.1 Initial Operation Safety Instructions
•
Mind safe attachment of the unit to suitable surface.
•
Make sure that all the screws are tight.
5.2 Procedure
•
Assemble individual parts in the shown order. Mind the correct arrangement of the parts according to
figures.
GSS 700 P
230V/50 Hz
IP 44
I
370 W/P1/S6/40%
1
280 min-
125 x 32 mm
2 x 30°
30° left/80° right
35 mm, 30 mm, 28 mm, 25,4 mm, 25 mm, 18 mm, 16 mm
1,5 m/H05 VV-F
38 kg
73 dB (A)
670 x 390 x 310
94220
21