Technical Data; Specified Conditions Of Use - Güde GNS 200 VS Traduction Du Mode D'emploi D'origine

English
ENGLISH
14

Technical Data

Wet grinder
Art. No
Rated voltage
Rated frequency
Rated input
Rated idle speed
Degree of protection
Wet grinding disc ø
Wet grinding disc Width max..
Wet grinding disc Hole diameter L
Wet grinding discGrain size
Max. wear until wet grinding disc replacement ø
Dry grinding disc ø
Dry grinding disc Width
Dry grinding disc Hole diameter
Dimensions L x W x H
Weight
Noise details
Sound pressure level L
Sound power level L
Measured according to EN 62841; Uncertainty K = 3 dB (A)
Wear ear protectors!
The declared noise emission value(s) have been measured in accordance with a standard test method and
may be used for comparing one tool with another.
The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
WARNUNG
The noise emissions during actual use of the power tool can differ from the declared values depending on
the ways in which the tool is used especially what kind of workpiece is processed.
Identify safety measures to protect the operator that are based on an estimation of exposure in the actual
conditions of use (taking account of all parts of the operating cycle such as the times when the tool is swit-
ched off and when it is running idle in addition to the trigger time).
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
Persons over 16 years of age can only work on the
appliance. An exception includes youngsters trained
pA
WA
Read and understand the operating
instructions before using the
appliance. Familiarise with the
in order to reach knowledge under supervision of
the trainer during occupational education.
In case of any doubts about connection and opera-
tion refer please to our customer center

Specified Conditions Of Use

This device may only be used for grinding e.g. axes,
scissors, blades, notching tools of various lengths
and blade widths as well as textures, notching
tools of any shape, spades, planers made of tool
GNS 200 VS
55247
230 V
50 Hz
120 W
32 - 150 min
-1
IP 23
200 mm
40 mm
12 mm
220 K
150 mm
200 mm
30 mm
12,5 mm
450 x 250 x 380 mm
10 kg
78,5 dB (A)
91,5 dB (A)