Güde GSS 700P Mode D'emploi Original page 17

Packaging
Protect from moisture
Technical Data:
Motor capacity
2.3 Assigned Use
The unit should be used exclusively to grind/sharpen and work hard metal saw discs.
The manufacturer shall not be made liable for damages if general rules and this manual regulations are not
observed.
2.4 Residual Hazards and Protective Action
2.4.1 Mechanical Residual Hazards
Hazard
Catching, w inding
Friction, abrasion
2.4.2 Electrical Residual Hazards
Hazard
Direct electrical contact
Indirect electrical contact
Keep Up Fragile
Connection Speed
Description
Loose-fitting clothes, jew els or
long hair may be caught by
moving parts.
A contact w ith the rotating
grinding w heel may result in
serious injuries.
Description
Defective cable or plug may
cause an electrical shock
Wounds caused by conductive
parts on open electrical or
defective structural parts
Weight
Protective action
Wear tight-fitting garments and
no jew els. Protect your hair w ith
a hairnet.
Alw ays prevent any contact of
your hands w ith the w heel.
Wear protective gloves.
Protective action
Have the defective
cable/plug exchanged by
a professional. Use the
unit only if connected via
a faulty current switch
(FI).
Alw ays unplug before any
maintenance.
Operate only w ith FI sw itch
installed.
19
Acoustic output level
Residual hazards
Residual hazards