Special Displays; Mains Voltage Available; Infrared (Ir) Remote Control (Air Conditioning System); Truma App With Inet Box - Truma CP Mode D'emploi Et Instructions De Montage

Fig. 31
After confirmation, the Truma CP plus VarioHeat control panel
initialises itself.
"INIT .." appears on the display while this is in progress.

Special displays

230 V

mains voltage available

The icon indicates that 230 V
able at the connected heater and/or air conditioning system.
Fig. 32
Infrared (IR) remote control (air conditioning
system)
When a command is sent via the infrared remote control of
the air conditioning system, "IR" appears in the display.
34
mains voltage (power) is avail-

Truma App with iNet Box

When a command is sent via the Truma APP from a mobile
device, "APP" appears in the display.

External control panel (CI-BUS)

When a command is sent via an external control panel with
CI-BUS, "CI" appears in the display.
The Truma CP plus VarioHeat control panel CI-BUS is
the company's own variant that is configured only at the
factory.

Energy type display

– The energy type e.g. gas (a) is displayed in heating mode
(see "Select energy type" on page 27)
a
Fig. 33