Technical Specifications; Operator Requirements - Güde POWERTEC Garden BIG WHEELER 508 VARI-S Traduction De La Notice Originale

Introduction
To enjoy your new machine as long as possible, please read
carefully the Operating Instructions and the attached safety
instructions before using it. Further, we recommend keeping
the Operating Instructions to recall the product features in
the future.
Within the continuous product development, we reserve
the right to make technical changes to improve it.
This document represents original Operating
Instructions.
Supply includes
Take the machine out of the transport package and check it
whether there are the following parts:
• BIG WHEELER 508 Vari-s Lawn Mower
•
Collection box
•
2 pcs of rear wheels
• 2 pcs of front wheels with spacer
• Spark plug wrench
•
Mulching wedge
•
2 pcs of knurled screws
• Allen screw with lock nut
• 2 pcs of flat head screws with nut
•
Operating Instructions
•
Warranty Certificate
• Car with addresses of service centres
Please contact your dealer if any parts are missing in the
supply or are damaged.
Use as designated
The lawn mower is suitable only for cutting medium to large
lawns.
This machine must not be used for any works other than for
which the machine has been designed and that are specified
in the Operating Instructions.
Any other use will be considered a use in conflict with the
designation. The manufacturer will not be liable for any
consequential damage or injuries. Please be sure to know
that the machine has not been designed for industrial
purposes.
Machine description (pic. 1)
1. Adjustable handle
2. Side ejection
3. Quick release lever
4. Air filter
5. Spark plug
6. Exhaust/muffler
7. Neck for filling oil
8. Height adjustment lever
9. Collection box
10. Reversing starter
11. Type label
12. Operating lever (stirrup for automatic switch-off)
13. Drive lever
14. Primer pump
15. Clamping screw
16. Travel speed controller

Technical specifications

Engine:
Capacity:
Idle speed:
Max. cutting width:
Collection box capacity:
Height adjustment, 6 degrees: 25-75 mm
Amount of oil:
Tank capacity:
Acoustic level pressure dB (A): 93.05 db (A) K = 3 dB (A)
Guaranteed
sound pressure level dB (A):
Vibrations:
Weight:
Mounting dimensions:
The measured values have been found according to
EN ISO 3744, EN ISO 11094 and EN 836.

Operator requirements

The operator must carefully read and understand the
Operating Instructions before using the machine.
Qualification
No special qualification is necessary for using the machine
apart from detailed instruction by an expert.
Minimum age
The machine can only be operated by persons over 16 years
of age. An exception includes youngsters operating the
machine within their professional education to achieve
necessary skills under trainer's supervision.
Training
Using the machine only requires appropriate instructions by
a professional or reading the Operating Instructions. No
special training necessary.
Before putting the machine into operation
CAUTION: Any mounting and servicing works must be
necessarily performed when the engine is switched off!
Please read the entire Operating Instructions before
assembling or starting your new lawn mower.
IMPORTANT: The mower is supplied without oil and
petrol.
Unpacking the mower
Take the mower out of the cardboard and check whether
there are no pieces left in the package.
Assembly
Mounting the wheels (pic. 5-12)
Mount wheels to the mower as shown in pictures 5-12.
Make sure the order of spacers on both sides
(pic. 5-12) is correct.
Make sure the star screws are tightened sufficiently
(self-locking).
Mounting the collection box (pic. 2-4)
1. Take the collection box, frame and the plastic insert out
of the package.
2. Fit the frame to the collection box while making sure the
coupling on the frame is outside the collection box.
3. (pic. 2, 3)
4. Now fix the collection box to the frame. (pic. 4)
14
2.7 kW/3.7 PS
-1
at max. 3,600 per min
140 ccm
-1
2,850 per min
508 mm
65 l
0.6 l
0.8 l
98 dB (A)
max. 6.8 m per s²,
K=1,5 m per s²
35 kg
1,520 x 550 x 1,000 mm