Decommissioning, Storage, Disposal; Decommissioning; Storage; Disposal - Mettler Toledo InTrac 785 Instructions D'utilisation

InTrac ® 785
9

Decommissioning, storage, disposal

InTrac ® 785
52 403 859
Please refer to Section 2 «Safety». Decommissioning may only be carried out by persons with
appropriate training or by skilled technicians.
9.1

Decommissioning

Proceed as described in Section 4.5.2 «Removing the retractable housing».
9.2

Storage

Store the InTrac785 in a dry place.
9.3

Disposal

It is recommended that the operator disposes of the device in accordance with local regulations.
The operator must deliver the device either to a licensed private or public disposal company,
or dispose of it himself in accordance with prevailing regulations. Waste is to be recycled or dis -
posed of without causing any risk to human health, and without using procedures or methods
that might harm the environment.
EC guidelines 75/442/EEC
91/156/EEC
Sorting
Sorting into waste groups takes place when dismantling the device. The groups are listed in
the current European Waste Catalogue. This catalog is valid for all wastes, whether intended for
disposal or for recycling.
The packaging is made up of the following materials:
– cardboard
– foam plastic
The housing is made of the following materials:
– steel
– polypropylene
– medium-wetted polymers as given in the specifications
© 07 / 12 Mettler-Toledo AG, CH-8606 Greifensee
37
Printed in Switzerland