Warning Notices And Symbols; Responsibilities, Organizational Measures; Responsibilities Of Operator - Mettler Toledo InTrac 785 Instructions D'utilisation

Le support rétractable
Masquer les pouces Voir aussi pour InTrac 785:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

InTrac
®
785
InTrac
®
785
52 403 859
Malfunctions and damage that can affect the safety and function must immediately be remedied
by the operator or an expert, and notified to the manufacturer in writing!
Danger! A defective retractable housing must neither be installed nor put into operation.
Faulty containment and installation out of conformance with regulations and instructions can
lead to the escape of medium or to pressure surges (explosion), potentially harmful both to
persons and to the environment.
2.7

Warning notices and symbols

The following symbols are used in this Instruction Manual to mark safety instructions:
Danger! Warning of a possible dangerous situation that can lead to light bodily harm and/or
material damage.
Caution! Warning of a possible dangerous situation that can lead to light bodily harm and/or
material damage.
Attention: Information referring to technical requirements. Non-adherence can lead to
malfunctions, uneconomic working and possibly also to loss of productivity.
2.8

Responsibilities, organizational measures

2.8.1

Responsibilities of operator

– The operator is under obligation only to permit persons to work with InTrac785 retractable
housings, who are familiar with the basic requirements of work safety and accident preven -
tion, and who have been instructed in the handling of the housing. This Instruction Manual
serves as the basic document.
– In addition to the instruction manual there are also generally valid legal and other binding re-
gulations for work safety and accident prevention as well as for environmental protection,
and these must be provided by the operator and instructed to personnel using the housings.
– The operator/user must be fully aware of safety and potential danger factors during work with
the housings and this awareness must be checked by the operator at regular intervals.
– Measures must be taken to ensure that the retractable housings are only operated in a safe
and fully functional condition.
– If the housings are employed in hazardous areas, compliance with prevailing regulations is
to be ensured.
Caution! Before the retractable housing is put into operation, the operator must have already
clarified that use of the housing in conjunction with the other associated equipment and resour-
ces is fully authorized.
© 07 / 12 Mettler-Toledo AG, CH-8606 Greifensee
13
Printed in Switzerland

Publicité

Table des Matières
loading

Table des Matières