Storage And Disposal; Storage; Disposal - Mettler Toledo InFlow 76X Instructions D'utilisation

InFlow 76X

9 Storage and disposal

InFlow 76X
52 403 711
NOTICE
The safety notes in Chapter 2 "Safety" must be observed. Decommissioning may only be
carried out by persons with appropriate training or by skilled technicians.
9.1

Storage

Store the InFlow 76X in a dry place.
9.2

Disposal

It is mandatory that the operator disposes of the device in accordance with local regulations.
The operator must deliver the device either to a licensed private or public disposal company,
or dispose of it himself in accordance with prevailing regulations. Waste is to be recycled
or disposed of without causing any risk to human health, and without using procedures or
methods that might harm the environment.
Sorting
Sorting into waste groups takes place when dismantling the device. The groups are listed in the
current European Waste Catalogue. This catalog is valid for all kinds of waste, whether intended
for disposal or for recycling.
The packaging is made up of the following materials:
– cardboard
– foam plastic.
The flow-through housing is made up of the following materials:
– steel
– PVDF (polyvinylidene fluoride)
– medium-wetted materials (plastics) according to specifications.
© 04/17 Mettler-Toledo GmbH, CH-8606 Greifensee
27
Printed in Switzerland