Construction Of The Retractable Housings; Lower Part Of Housing For Process Adaption - Mettler Toledo InTrac 785 Instructions D'utilisation

InTrac ® 785
InTrac ® 785
52 403 859
3.5

Construction of the retractable housings

3.5.1

Lower part of housing for process adaption

1" NPT – InTrac785 / AN / 220 / **** / N10 / ** / –
215.8 mm / 8.5"
219.8 mm / 8.65"
The immersion depth is reduced by 40 mm when a flushing chamber is fitted.
1 1 ⁄ " NPT – InTrac785 / AN / 220 / **** / N14 / ** / –
4
212.6 mm / 8.37"
216.6 mm / 8.52"
The immersion depth is reduced by 40 mm when a flushing chamber is fitted.
DIN flange DN50-PN16 – InTrac785 / AN / 220 / **** / D04 / ** / –
206.8 mm / 8.14"
210.8 mm / 8.3"
The immersion depth is reduced by 40 mm when a flushing chamber is fitted.
ANSI flange A150-1.5" – InTrac785 / AN / 220 / **** / A02 / ** / –
206.8 mm / 8.14"
210.8 mm / 8.3"
The immersion depth is reduced by 40 mm when a flushing chamber is fitted.
© 07 / 12 Mettler-Toledo AG, CH-8606 Greifensee
21
Printed in Switzerland