Disposal - Meister MFW12 Traduction Du Manuel D'utilisation Original

5454310-Akku-Multi_man 11.01.18 13:08 Seite 87
Problem
The tool holder (10)
does not move after the
multi-function tool has
been switched on.
The oscillation/speed
cannot be decreased
or increased.
13 – Disposal
Disposing of packaging
Sort the packaging accurately
before disposal. Put cardboard and
box with waste paper, film in the
recyclable material collection.
Disposing of the multi-function
tool
Dispose of the multi-function tool in
accordance with the regulations that
apply in your country or state.
Do not dispose of old
tools in the household
waste bin! This
symbol states that
this product cannot be
disposed of in
household waste, in accordance
with the Directive on Waste
Electrical and Electronic
Equipment (2012/19/EU) and
Probable cause(s)
Dirt, wood shavings
or other small objects
have got into the gap
of the tool holder.
The multi-function
tool is defective.
The speed regulator (6) – Vacuum the speed regulator
is soiled.
national law. This product must
be disposed of at an appropriate
collection point. For example, this
can be done by returning the
product when buying a similar
product, or depositing the
product at an authorised
collection point for recycling
electrical and electronic
equipment. Handling old tools
incorrectly can have negative
effects on the environment and
human health due to potentially
hazardous substances frequently
contained in electrical and
electronic equipment. You will
also make effective use of natural
resources by disposing of this
product correctly. You can obtain
information on collection points
for old tools from your local city
administration, the public
disposal provider, an authorised
center for disposing of electrical
and electronic equipment, or your
refuse collectors.
Remedies
– Remove the battery (4) and
vacuum the tool holder gap
with a vacuum cleaner if
required.
– Contact the manufacturer's
customer services
department.
and the gap with a vacuum
cleaner if required.
87