Components; Correct Use - Meister MFW12 Traduction Du Manuel D'utilisation Original

5454310-Akku-Multi_man 11.01.18 13:08 Seite 71
• Condition of the multi-function
tool and/or proper maintenance,
• Type of material and use of the
multi-function tool,
• Use of the correct accessory,
which is in faultless condition,
• The user firmly gripping the
multi-function tool,
• Intended use of the multi-
function tool, as set out in this
operating manual.
Improper use of the multi-function
tool can cause vibration-related
health issues.
ATTENTION! The following
safety measures must be
observed in order to protect the
user, depending on the type of
use and / or usage conditions:
– Try to avoid vibration as much as
possible.
– Only use accessories in faultless
condition.
– Wear vibration-proof gloves
when using the multi-function
tool.
– Care and maintenance of the
multi-function tool must be
carried out in accordance with
this operating manual.
– Avoid using the multi-function
tool at temperatures below
10 °C.
– Plan the steps of your work so
that you will not have to use the
heavily vibrating multi-function
tool over several days.
3 – Components
1 Clamping lever
2 Anti-trap protection
3 On / off switch
4 Battery
5 Opening (for retaining clip)
6 Speed regulator
7 Charge level display
8 Work light
9 Threads (for handle), 2x
10 Tool holder
11 Circular saw blade
12 Segment saw blade
13 Sanding plate
14 Diamond segment saw blade
15 Scraper
16 Sanding sheet, 20×
17 Extraction channel
18 Retaining clip
19 Handle
20 Extraction adaptor
21 Charger
22 Storage bag (not pictured)
4 – Correct use
The multi-function tool is exclusively
for private use in the areas of DIY
and hobby construction, intended
for the following purposes:
• for sawing and separating wood
materials, plastic, plaster, non-
iron metals and fasteners (e.g.
nails, brackets),
71