Preparation - Meister MFW12 Traduction Du Manuel D'utilisation Original

5454310-Akku-Multi_man 11.01.18 13:08 Seite 80
Product Safety Act
(Produktsicherheitsge setz,
or ProdSG).
Read the operating
manual.
Do not expose the battery
to temperatures over
50 °C!
Avoid water contact with
the battery. Do not dispose
of the battery in water.
Explosion hazard!
Do not dispose of the
battery in the toilet.
Do not dispose of the
battery in a fire. Explosion
hazard!
The charger corresponds
with protection class II.
Excess current protection.
Only operate the charger
indoors.
DC voltage.
Important! Read the
operating manual for
the charger!
80
7 – Preparation
Checking the multi-function tool
and delivery contents
1. Remove the packaging material.
2. Check to make sure all parts
have been supplied (see Fig. A).
3. Check for any visible damage to
the multi-function tool or
individual parts. If this is the
case, do not use the tool.
Contact the manufacturer on the
service address supplied on the
warranty card.
Getting to know the function
principle
The multi-function tool does not
make the mounted tool rotate;
instead, it vibrates back and forth
(oscillation).
Getting to know which materials
are authorised
You are permitted to work with the
materials listed when using the
following tools:
Circular saw blade (11)
Materials: Wood, plastic, plaster and
other soft materials
Use: Cut-off and plunge sawing,
sawing close to the edge in areas
which are difficult to access, cutting
out openings