Troubleshooting - Meister MFW12 Traduction Du Manuel D'utilisation Original

5454310-Akku-Multi_man 11.01.18 13:08 Seite 86
accessories in the storage bag
whenever possible (22).
12 – Troubleshooting
Many defects can occur as a result
of minor errors, which you can
Problem
The handle (19) and/or
multi-function tool
cannot be assembled.
The extraction
channel (17) and/or the
extraction adaptor (20)
is loose/always falls out.
The multi-function tool
cannot be switched on.
86
repair yourself. Follow the
instructions in the following table for
this purpose.
If the tool has a defect which
cannot be repaired, contact
customer services.
Probable cause(s)
The threads (9) are
dirty.
The tool holder (10)
is damaged.
The extraction channel – Attach the exhaust channel
and/or extraction
adaptor is not attached
properly.
The on/off switch (3)
is jammed.
The on/off switch is
defective.
Remedies
– Always keep the threads
clean, as set out in the
chapter 'Cleaning and
maintenance'.
– Contact the manu -
facturer's customer
services department and
get the damaged or
defective part changed.
to the casing of the multi-
function tool using the
retainer clip (18).
– Press the extraction adaptor
firmly into the connection
supports of the extraction
channel and turn it anti-
clockwise to fix it in place.
– Keep the on/off switch
clean, as set out in the
chapter 'Cleaning and
maintenance'.
– Contact the manufacturer's
customer services depart -
ment and get the damaged
or defective part changed.