Meister MFW12 Traduction Du Manuel D'utilisation Original page 78

Outil multifonctions sans fil
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 47
5454310-Akku-Multi_man 11.01.18 13:08 Seite 78
– Never expose the multi-function
tool to high temperatures (heating
etc.) or weather influences (rain
etc.).
– Keep your hands away from the
work area. Do not hold the tool
from below. Contact with the saw
blade or scraper may lead to
injury.
– Hold the multi-function tool firmly
with both hands while working,
and make sure you are in a safe
position. It is safer to guide the
tool with two hands.
– Do not scrape damp materials
(e.g. wallpaper), and do not
scrape on a damp surface.
– Position your body so that you
will not receive any injuries if the
tool should slip.
– Only use insertion tools which
are in immaculate condition.
– Insertion tools can become
extremely hot. Do not touch the
insertion tool after cutting, and
make sure that the multi-function
tool is in a safe place after
finishing work.
Safety notes for sanding paints
– Do not sand paints which contain
lead. Check to see whether the
paint to be sanded contains lead
before commencing work. Dust
from paints containing lead can
be toxic.
78
– A special test can be used or a
commercial paint company can
be requestedto determine
whether paint contains lead. In
case of doubt, you should use a
special dust mask when working
with fine dust containing lead.
Consult a specialist in this case.
– When sanding coatings containing
lead, some types of woods and
metals may create damaging or
toxic dust. Touching or inhaling
this dust can represent a hazard
for the person operating the tool,
or any persons nearby. Prevent
yourself and other persons nearby
from touching or inhaling this dust
by using suitable personal
protective equipment. Normal
dust masks are not sufficient to
guarantee safety.
– Do not allow children or pregnant
women to enter the room and the
work area where the sanding
work is being carried out.
– Eating, drinking or smoking
should not be permitted during
work. Wash your hands before
eating, drinking or smoking. Do
not leave any food or drinks lying
around, as they are at risk of
being covered by dust.
– Clean the work area carefully
after sanding surfaces.
Operating safety instructions for
dust extraction
Dust from materials with coatings
that contain lead, some types of

Publicité

Table des Matières
loading

Table des Matières