Meister MFW12 Traduction Du Manuel D'utilisation Original page 75

5454310-Akku-Multi_man 11.01.18 13:08 Seite 75
power tool. Power tools are
dangerous in the hands of
untrained users.
e) Maintain power tools. Check
for misalignment or binding of
moving parts, breakage of
parts and any other condition
that may affect the power
tool's operation. If damaged,
have the power tool repaired
before use. Many accidents are
caused by poorly maintained
power tools.
f) Keep cutting tools sharp and
clean. Properly maintained
cutting tools with sharp cutting
edges are less likely to bind and
are easier to control.
g) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking
into account the working
conditions and the work to be
performed. Use of the power tool
for operations different from those
intended could result in a
hazardous situation.
Use and care of cordless tool
a) When recharging a battery,
only use chargers that have
been recommended by the
manufacturer. With a charger
that is designed for use with a
particular type of battery, there is
a risk of fire if it is used with
other battery types.
b) Only use the rechargeable
batteries intended for the
power tools. The use of other
batteries may lead to injury and
risk of fire.
c) When not in use, keep the
rechargeable battery away
from paper clips, coins, keys,
nails, screws or other small
metallic objects that may
bridge the contacts. A short-
circuit between the rechargeable
battery contacts can lead to
burns or fire.
d) Fluid can escape from the
battery when used incorrectly.
Avoid all contact with this. In
the event of accidental
contact, rinse with water. If
liquid should get into the eyes,
get medical assistance. Battery
fluid may result in skin irritations
and burns.
Service
a) Have your power tool serviced
by a qualified repair person
using only identical
replacement parts. This will
ensure that the safety of the
power tool is maintained.
Safety notes for chargers
a) Do not charge non-recharge -
able batteries with the charger.
b) Make sure that the multi-
function tool is switched off
before you insert the battery.
Inserting a battery into an
electric tool which is switched on
can lead to accidents.
75