1. With the power off, press and hold down the Scanner buttons 8, 9 and Scene button 2 at a time.
2. Apply the power again while pressing these three buttons, the LCD shows "RECEIVE" indicating this unit is receiving the file dump.
3.When receiving is over, this unit will return to the normal mode.
Power Input :
DMX input :
DMX output :
MIDI signal :
Audio Input :
Dimensions :
Weight :
RECEIVE FILE DUMP
TECHNICAL SPECIFICATIONS
DC 9~12V, 500 mA min.
3 pin male XLR
3 pin female XLR
5 pin standard interface
by built-in microphone or line in
482 x 134 x 85 mm
2,7 Kg
Page 25