Face Avant - Nicols C 512 J Notice D'utilisation

Console dmx 16 canaux
Masquer les pouces Voir aussi pour C 512 J:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OVERVIEW

Face avant :

1. Scanner Buttons(1-12)
12 scanners of 16 DMX channels & fader control
Press a scanner button to turn on manual fader control. Press the scanner button
again to turn off fader control. The LED besides the button lights or goes out to
indicate this selection.
2. Scene Buttons
Press the scene buttons to load or stored your scenes. There are a maximum of 240 programmable scenes.
3. Faders
These faders are used to control the intensity of channel 1-8 or channel 9-16 depending upon the selected page.
4. Page Select Button
Used to select page between Page A(1-8) and Page B(9-16).
5. Fog Machine Button
6. SPEED TIME Slider
7. Fade Time Slider
8. LCD Display
Shows the current activity or programming state.
9. Pan Wheel
This joystick is used to control the pan of the scanner or for programming.
10. Tilt Wheel
This joystick is used to control the Tilt of the scanner or for programming.
11. Program Button
Activates Program mode.
12. MIDI/Rec
Used to control MIDI operation or to record programs.
13. Auto/Del
14. Music/Bank Copy
15. Bank Up/Down
16. Tap/Display
17.
Blackout/Stand alone Button
18. Chase Buttons(1-6)
programmed scenes.
19. Fine Button
When Fine is on, the Pan or Tilt wheel will control the scanner in the smallest increment.
20. Mode Button
Pressing Fine and Mode buttons allows to activate Assign or Reverse mode.
Activates Fog Machine .
Used to adjust the chase speed time within the range of 0.1 second to 10 minutes.
Used to adjust the fade time. Fade time is the amount of time it takes for a scanner(or scanner) to move
from one position to another, for the dimmer to fade in or fade out.
Activates Auto mode or to delete scenes or chases.
Activates Music mode or to copy a bank of scenes
Press the Up/Down button to select from 30 banks.
Used to create a standard beat or to change the value mode between % and 0-255.
Tap to momentarily pause whole output.hold on this button enter Stand alone
These buttons are used for activating the chase of
Page 15

Publicité

Table des Matières
loading

Table des Matières