Nicols C 512 J Notice D'utilisation page 22

Console dmx 16 canaux
Masquer les pouces Voir aussi pour C 512 J:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Assign DMX channel
1.
Program enable. Press the BLACKOUT key to turn the LED off
2.
Press the Fine and Mode buttons at a time, the Assign LED lights up indicating Assign mode is active.
3.
Use Bank Up/Down button to change between the Pan and Tilt, the corresponding LED lights indicating this selection.
4.
Tap the Tap/Display button to change between 8 CH. and
16 CH. mode, the LCD reads
ASSXX XX or
ASSXX XX
X/Y 08CH
X/Y 16CH
5.
Tap the Scanner button to select the scanner.
6.
Tap the Page Select button to select Page A or Page B.
7.
While pressing the Mode button, tap the Scene button, all LEDs should flash briefly indicating the DMX channel is assigned.(
Scene button 1 stands for DMX channel 1, Scene button 2 stands for DMX channel 2, and so on.)
8.
Continue steps 3-7
8CH Mode: you may assign 24 scanners for the PAN/ TILT movements. Under 8CH mode, PAN / TILT can be set both in
-
page A and page B.
16CH mode: you may assign 12 scanners for PAN / TILT movements. Under 16CH mode, PAN / TILT can only be set in
-
page A or page B.
Reverse DMX channel
1.
Program enable.
2.
Press the Fine and Mode buttons the second time, the Reverse LED lights up indicating Reverse mode is active.
3.
Use Bank Up/Down button to change between the Pan and Tilt, the corresponding LED lights indicating this selection.
4.
Tap the Tap/Display button to change between 8 CH. and 16 CH. mode.
5.
Tap the Scanner button to select the scanner.
6.
Tap the Page Select button to select Page A or Page B.
7.
While pressing the Mode button, tap the Scene button, all LEDs should flash briefly indicating the DMX channel is reversed.(
Scene button 1 stands for DMX channel 1, Scene button 2 stands for DMX channel 2, and so on.)
8.
Continue steps 3-7
- 8CH Mode: you may reverse PAN/ TILT movements for 24 scanners. Under 8CH mode, PAN / TILT can be set both in page A and
page B.
- 16CH mode: you may reverse PAN / TILT movements for 12 scanners. Under 16CH mode, PAN / TILT can only be set in page A or
page B.
ASSIGN / REVERSE DMX CHANNELS
Page 21

Publicité

Table des Matières
loading

Table des Matières