Delete A Scene - Nicols C 512 J Notice D'utilisation

Scanner Copy
This function allows you to copy the settings of one scanner to another.
1. Program enable. Press the BLACKOUT key to turn the LED off.
2. Press and hold down the Scanner button you want to copy.
3. While holding the Scanner button, tap the Scanner button you want to copy to.
Scene copy
1.Program enable. Press the BLACKOUT key to turn the LED off.
2. Tap the Bank Up/Down button to select the bank that contains the scene you wish to copy.
3. Select the scene you want to copy by tapping its Scene button
4. Tap the Bank Up/Down button to select the bank you wish to copy the scene to.
5. Tap the MIDI/Rec button.
6. Tap the Scene button you wish to copy the scene to.

Delete a scene

1. Tap the desired Scene button to select the scene you wish to delete
2. Press and hold down the Auto/Del button. While holding down the Auto/Del button, tap the Scene button that stores the scene you
wish to delete.
Scene editing
This function will reset all DMX channel to 0 output.
1. With the power off, press and hold down the Program and Bank Down buttons at a time.
2. Apply power again, all scenes should be cleared.
Page 18