Product Introduction; Technical Specifications - Nicols 1812 FC Z Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

PRODUCT

Product introduction

This product is designed for indoor use. Suitable applications include wash or effect lighting for
architectural, stage or nightclub applications. This product can also be installed for use in signage
and advertising using the dynamic functions available with DMX512 control. Direct input of
DMX512 signal allows the units to be controlled from any DMX512 controller. This product can be
operated as a single unit or in multiple units for large applications.
Mounting:
-Hanging
The product can be mounted in a hanging position using the supporting bracket. The bracket
should be secured to the mounting truss or structure using a standard mounting clamp. Please
note that when hanging the unit a safety cable should also be used.
-Upright
The product can be mounted in an upright or sitting position using the supporting brackets.
-NOTE:
The product can be mounted at any angle and in any position. It is possible to further adjust the
angle of the product using the two adjustment knobs located on the side of the fixture.

TECHNICAL SPECIFICATIONS

Voltage: AC100-240V, 50/60Hz
Power: 240W
Light Source: 18PCS *12W ( RGBWA 5in1 LED)
Lifespan: around 50,000 hours
Housing: Die-casting aluminum, powder-coated finish
Control: DMX 512, 7 modes (3/4/5/6/7/8/13CH)
Control Mode: DMX, Auto, Master/Slave, Sound active
Dimmer: 0-100%
Strobe: 0-20Hz
Beam angle: 8º -45º
Net Weight:4.8Kg
Size: 290x220x325mm

Publicité

Table des Matières
loading

Table des Matières