FEATURES
192 DMX channels.
-
12 scanners of 16 DMX channels.
-
30 banks of 8 programmable scenes.
-
6 chases of 240 programmed scenes from 30 banks
-
8 faders for manual control
-
All data can be sent or received between two units
-
Auto programs(scenes and chases) under control by Speed Time sliders (or Tap Sync)
-
Fade Time/Assign Fade Time
-
The scanners under control by Pan and Tilt jog wheels
-
Fine adjustment of the Pan and Tilt
-
Reverse DMX channels causing the faders to control the output reversely
-
Preview assigned or reversed DMX channels
-
8 CH./16 CH. mode for Assigned or Reversed DMX channels
-
Blackout master / Stand alone mode
-
Manual override
-
Built-in microphone for Music triggering
-
MIDI control over banks, chases and Blackout
-
LCD display
-
DMX polarity select
-
Power failure memory
-
Auto Address
-
GENERAL INSTRUCTIONS
Please read the user manual carefully, as it includes important information regarding details of operation, maintenance, and technical
data. Keep this manual with the unit for future consult.
WARNINGS
DO NOT make any inflammable liquids, water or metal objects enter the unit.
Should any liquid be spilled on the unit, DISCONNECT the power supply to the unit immediately.
STOP using the unit immediately In the event of serious operation problems and
either contact your local dealer for a check or contact us directly.
DO NOT open the unit--there are no user serviceable parts inside.
NEVER try to repair the unit yourself. Repairs by unqualified people could cause
damage or faulty operation. Contact your nearest dealer.
CAUTIONS
This unit is NOT intended for home use.
After having removed the packaging check that the unit is NOT damaged in any way. If in doubt, DON'T use it and contact an
authorized dealer.
Packaging material (plastic bags, polystyrene foam, nails, etc.) MUST NOT be left within children's reach, as it can be
dangerous.
This unit must only be operated by adults. DO NOT allow children to tamper or play with it.
NEVER use the unit under the following conditions:
In places subject to excessive humidity.
In places subject to vibrations or bumps.
In places with a temperature of over 45 C/113 F or less than 2 C/35.6 F.
Protect the unit from excessive dryness or humidity (ideal conditions are between
35% and 80%).
DO NOT dismantle or modify the unit.
and Fade Time sliders
Page 14