General Instructions - Nicols C 2024 J Notice D'utilisation

FEATURES
DMX 512 CONTROLLER controls up to 504 DMX channels

Controls 20 scanners with up to 24 channels per fixture

24 chases of 40 steps for a total of 960 steps

Programmable chases with fade time and speeds

Scene pause time: 0.1-25.5 second/step

Scene cross speed: 0-25.5 seconds

Dimmer channel: 24

Memory capacity : 512 Ko

Blackout

LCD Display, 16x2 characters

Integrated and assignable Joystick

3-Pin XLR input/ output

Input voltage :
AC100-240V 50/60Hz 9V/1000mA
Dimensions : 485mm x 250mm x 91mm
Weight: 5 Kg
CONTENTS

1 x C 2024 J controler

1 x C 2024 J user's manual

1 x Power adapter

GENERAL INSTRUCTIONS

Please read the user manual carefully, as it includes important information regarding details of operation, maintenance, and technical
data. Keep this manual with the unit for future consult.
WARNINGS

DO NOT make any inflammable liquids, water or metal objects enter the unit.

Should any liquid be spilled on the unit, DISCONNECT the power supply to the unit immediately.

STOP using the unit immediately In the event of serious operation problems and
either contact your local dealer for a check or contact us directly.

DO NOT open the unit--there are no user serviceable parts inside.

NEVER try to repair the unit yourself. Repairs by unqualified people could cause
damage or faulty operation. Contact your nearest dealer.
CAUTIONS

This unit is NOT intended for home use.

After having removed the packaging check that the unit is NOT damaged in any way. If in doubt, DON'T use it and contact an
authorized dealer.

Packaging material (plastic bags, polystyrene foam, nails, etc.) MUST NOT be left within children's reach, as it can be
dangerous.

This unit must only be operated by adults. DO NOT allow children to tamper or play with it.

NEVER use the unit under the following conditions:
In places subject to excessive humidity.
In places subject to vibrations or bumps.
In places with a temperature of over 45 C/113 F or less than 2 C/35.6 F.
Protect the unit from excessive dryness or humidity (ideal conditions are between
35% and 80%).
DO NOT dismantle or modify the unit.

Page 8