General Safety Instructions - Nicols X-RAY 5 NEO Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Thank you for using our products. For the sake of safety and better operation of this product, please read
this manual carefully before using and operating it.
1.
GENERAL INSTRUCTIONS
a.
Thank you for purchasing this product. Please read the user guide for safety and operations information
before using the product. They contain important information about the security of the facility and on the
use and maintenance of equipment.
Keep this manual for future reference. In case of sale of equipment to another user, it is important that this
manual is attached to the equipment to the new user has the necessary information to use and can read
the warnings on safety.
It is essential that the user duly follows the safety instructions and warnings mentioned in that user
manual. The dealer won't be able be responsible for the defaults or any other problems due to the
mishandling from the user and the non-following of the instructions included in that user manual.
This product is suitable for creating perfect laser programs and high-quality laser effects.
This unit is designed to produce decorative effect lighting and is used in light show systems.
This product is a so-called show laser emitting radiation with a wavelength spectrum and producing lasers
for shows. Please refer to the safety instructions specific for lasers.
Before any first use, unpack the set and make sure there was no damage during transport. Check for
missing any part supplied with the laser:
- 1 x X-RAY 5 NEO
- 1 x POWER CABLE
- 1 x USER MANUAL
- 1 x IR REMOTE
b.
This fixture must be earthed to in order to comply with the safety regulations and to avoid any electrical
-
shock.
UNPACKING

GENERAL SAFETY INSTRUCTIONS

Publicité

Table des Matières
loading

Table des Matières