Mounting The Propeller - Reely SKY Cessna Notice D'emploi

f) Mounting the Propeller
Remove the nut (1) that is screwed on at delivery from the motor shaft. Push
the spinner back plate (2) and the propeller (3) onto the motor shaft.
Then screw the nut (1) back onto the motor shaft and tighten it.
Important:
Always check that the nut is screwed tight. A propeller which breaks
off at full throttle can cause serious damage to individuals and/or
property!
Push the spinner cap (1) onto the motor shaft and screw it on with the two
included screws (2).
42
Figure 11a
Figure 11b