Storage; Ordering New Filters - Cleanmaxx CP-CY4207ES-2 Mode D'emploi

Table des Matières

Les langues disponibles

Cleaning the Nozzles

Remove hair and ﬂ uff from the nozzles at regular intervals.

Storage

Store the vacuum cleaner in a dry, cool place indoors that is not accessible to children

and animals.

Tips for practical storage:

You can order a new HEPA, dust and motor ﬁ lter at: www.service-shopping.de

09671_de-en-fr-nl_V1.indb 25

1. To make it easy to clean the turbo nozzle, you can open the

nozzle: To do this, twist the ring (D) on the end piece of the

nozzle anticlockwise.

2. Carefully remove the upper part of the housing. You can now

remove hair, dust, etc.

3. After cleaning, put the turbo nozzle back together and twist the

ring on the end piece shut by turning it clockwise.

– Push together the telescopic tube as far as possible and, if

you have not already done so, place the ﬂ oor nozzle onto the

telescopic tube. You can now hook the ﬂ oor nozzle onto the

back of the device.

– You can attach the crevice and brush nozzle as well as the

upholstery nozzle to the telescopic tube using the bracket that

is also supplied.

11.08.2015 12:30:57

Table des Matières

Table des Matières

Z 09671