Cleanmaxx CP-CY4207ES-2 Mode D'emploi page 18

EN
– if you are no longer using the device,
– before you change the nozzles,
– if a fault or error occurs while the device is in operation,
– if liquids or foreign bodies have found their way into the device,
– before a thunderstorm,
– before you clean parts of the device and accessories.
• The device must be switched off when inserting or removing the
mains plug.
• Always pull the plug and never the cable!
• Never pull the device by the cable to move it. Use the handle.
• Do not try to lubricate the rollers with lubricant or oil. This would
cause dust and dirt to increasingly adhere to the rollers.
• Note the MAX marking on the dust container. If the marking is
reached during use, empty the dust container before you carry
on vacuum cleaning.
• Empty the dust container after each use. The fi lters must also be
regularly cleaned in order to prevent overloading of the motor.
• The dust container and the fi lters must be completely dry before
you insert them again and use or store away the device.
• Store the device in a dry place that is not accessible to children
and animals when it is not being used.
09671_de-en-fr-nl_V1.indb 18 09671_de-en-fr-nl_V1.indb 18
18
11.08.2015 12:30:53 11.08.2015 12:30:53