BEFORE USE READ THESE INSTRUCTIONS AND RETAIN FOR FUTURE REFERENCE
INTRODUCTION
The following instructions contain important information about
the machine and safety advice for the operator. Equipment must
be operated, serviced and maintained in accordance with the
manufacturer's instructions. If in doubt contact the supplier of
your machine.
Read all instructions before using the
machine
PRODUCT INFORMATION
These commercial floor treatment machines are designed for
the scrubbing and polishing of hard floors and/or shampooing of
carpets in indoor areas. This machine is for indoor use only. The
machine is intended for commercial use, for example in hotels,
schools, hospitals, factories, shops, offices, rental businesses and
other than normal housekeeping purposes.
TECHNICAL SPECIFICATIONS
Model
Product Code
Voltage AC (~)/ Frequency
Motor Power
Pad / brush speed
Working width
Sound pressure level
Sound power level
Dimensions (L x W x H) with
handle
Dimensions (L x W x H)
without handle
Weight
Cable length
Ingress Protection Rating
Warranty
Handle vibration does not exceed 2.5 m/s² when operating
on a smooth hard surface.
Noise levels measured at a distance of 1 metre from
machine and 1.6 metres above floor, when operating on a
hard floor. Measurements recorded using a hand held
meter.
Above dimensions are approx. Since the company's policy
is to continuously improve the product, there could be
changes without prior notice.
1
IMPORTANT
Orbis Orbital
1500
OB451500
V/Hz
230 / 50
W
1100
rpm
1490
cm
43
dB(A)
62.1
dB(A)
70.4
cm
66 x 46 x 125
cm
66 x 46 x 29
kg
50.5
m
15
IPX4
1 year subject to
conditions
EC Declaration of Conformity
Machine Type: Floor Cleaning Machine
Model: OB451500...,
This machine is in conformity with the following EU
directives:
Machinery Directive
The EMC Directive
Applied harmonised standards:
EN60335-1, EN60335-2-67, EN55014-1, EN55014-2,
EN62233, EN61000-3-2, EN61000-3-3
Truvox International Limited
Unit C (East), Hamilton Business Park,
Manaton Way, Botley Road,
Hedge End, Southampton,
SO30 2JR, UK
WASTE ELECTRICAL & ELECTRONIC EQUIPMENT
(WEEE)
DO NOT dispose of this device with unsorted
waste. Improper disposal may be harmful to the
environment and human health. Please refer to
your local waste authority for information on
return and collection systems in your area.
IMPORTANT SAFETY ADVICE
The safety information described in this manual provides basic
precautions and supplements standards in force in the country
where the machine is used.
This symbol warns the operator of hazards and unsafe
practices which could result in severe personal injury
or death.
WARNING – to reduce the risk of injury,
electric shock or fire.
1.
This machine must only be used for the manufacturer's
approved application as described in this manual.
2.
The machine must be unpacked and assembled in
accordance with these instructions before connecting to
the electrical supply.
3.
Only genuine accessories and spare parts provided with the
machine or those approved by the manufacturer should be
used. The use of other accessories may impair the safety of
the machine. All repairs must be performed by a qualified
service agent.
4.
DO NOT modify the machine from its original design.
5.
Operators must be fully trained in the use of the machine in
accordance with these instructions, able to perform regular
user maintenance and the correct selection of accessories.
6.
Operators should be physically capable to manoeuvre,
transport and operate the machine.
7.
Operators should be able to recognise unusual operation of
the machine and report any problems.
2006/42/EC
2014/30/EU
Malcolm Eneas
Operations Manager
Southampton, 02/11/2018
04-19