Unit Installation - Clarion FZ104PAE Mode D'emploi Et Manuel D'installation

Notes of installation:
•
Before installation, please make sure proper connections are conducted and the unit operates
normally. Improper connection may result in damage to the unit.
•
Use only accessories designed and manufactured for this unit. Other unauthorized accessories
may result in damage to the unit.
•
Before installation, please fasten all power cables.
•
DO NOT install the unit in the place where close to hot area to prevent damage to electrical
components.
•
To prevent electric spark, connect the positive pole first and then the negative pole.

Unit installation

1. Insert mounting bracket into dash board,
choose appropriate mounting tab according
to the gap width, bending the mounting tab
outwards with a screwdriver to fix the mounting
bracket in place.
2. Slide the unit into the bracket until you hear a
click sound.
Dashboard
Mounting Bracket
11
FZ104PAE
Screwdriver
Trim ring installation
Attach the trim ring around the front panel. Take
care of the top and bottom of the trim ring and
mount it so that all the hooks are locked.
Top
Bottom