Product Specification; Certificates - Mettler Toledo InPro 6000G Serie Instructions D'utilisation

InPro 6800 G / 6850i G / 6900i G / 6950i G O
8

Product specification

8.1

Certificates

Each sensor is delivered with a set of 3.1 certifi-
cates (complying with EN 10204).
All wetted metal parts (sensor shaft, cap sleeve and
membrane body) are identified with a engraved
symbol corresponding to the heat number on the
paper certificate delivered with the sensor.
Each wetted metal part (sensor shaft, cap sleeve and
membrane body) is polished in order to get a surface
roughness lower than 0.4 µm (16 µin). This repre-
sents a roughness grade number of N5 (according to
ISO 1320:1992).
© 09 / 09 Mettler-Toledo AG
Printed in Switzerland
12 mm
2
InPro 6000 G – Series
52 206 477
29