During Operation - Reely Micro Beaver RtF Notice D'emploi

• Before commissioning, check the trim button settings for direction control and adjust them if required.
• Always check the correct and secure position of the propeller before operation.
• Make sure that no objects, clothes or body parts are in the range or the suction area of the rotor while
it is rotating.
c) During Operation
• Do not take any risks when operating the product! Your own safety and that of your environment depends
completely on your responsible use of the model.
• Improper operation can cause serious damage to people and property! Therefore make sure to keep a
sufficiently safe distance to persons, animals or objects during operation.
• Select a suitable room or suitable flight area to operate your model. We recommend a warehouse or gym
for your first flight attempts. If you use the model in the outdoor area, choose a perfectly windstill day.
• Only fly your model if your ability to react is unlimited. The influence of tiredness, alcohol or medication
can cause incorrect responses.
• Do not fly directly towards audience or yourself.
• Motor, flight controller and flight battery may heat up during operation of the model. For this reason, wait
for 5 to 10 minutes before recharging or replacing the flight battery. The drive motor must have cooled
down to ambient temperature.
• Never switch off the remote control (transmitter) while the model is in use. After landing, always discon-
nect the flight battery from the model first. Only then must be remote control be switched off.
• In case of defect or malfunction, remove the cause of the interference before starting your model again.
• Never expose your model or the remote control to direct sunlight or excessive heat for an extended
period of time.
• After use, the flight battery must be disconnected from the model and the remote control switched off.
Remove the batteries from the transmitter for extended storage.
33