Intended Use; Basic Safety Information - Burkert S020 Manuel D'utilisation

2.

inTended uSe

use of insertion fittings that does not comply with the ins-
tructions could present risks to people, nearby installations
and the environment.
• The S020 fitting is intended for installation in a pipe, of an
insertion device.
• Use this fitting in compliance with the specifications and condi-
tions of commissioning and use given in the contractual docu-
ments, in these operating instructions and in the user manual for
the device which is inserted into it.
• Safe and trouble-free operation of the fitting depends on its
proper transport, storage and installation, as well as careful
operation and maintenance.
• Only use this fitting as intended.
→
Observe any existing restraints when the fitting is exported.
6
English
Type S020
Intendeduse
3 . b A Si c S Af eT y
i n f o r mATi o n
This safety information does not take into account:
• any contingencies or occurences that may arise during installation,
use and maintenance of the devices.
• the local safety regulations for which the operating company is res-
ponsible including the staff in charge of installation and maintenance.
danger due to high pressure in the installation.
danger due to high temperatures of the fluid.
danger due to the nature of the fluid.
Various dangerous situations
To avoid injury take care:
• to prevent any unintentional power supply switch-on.
• to ensure that installation and maintenance work are
carried out by qualified, authorised personnel in possession of
the appropriate tools.
• to guarantee a set or controlled restarting of the process, after a
power supply interruption.
• to use the fitting only if in perfect working order and in com-
pliance with the instructions provided in these operating
instructions.