g) Operation with the app
When the quadrocopter is ready to start and the app is activated in your Smartphone with "Play", you will receive a
live image from the quadrocopter camera. You can start at once and – if desired – fly the quadrocopter in FPV mode.
The App also has a function "3D" (figure 15, item 9). The live view is divided on the Smartphone display for this. In
connection with "Virtual Reality glasses" ("VR glasses", not enclosed, must be purchased separately), you can thus
perform FPV operation virtually in 3D (i.e. with spatial view). Activate the 3D function in the App and install your
Smartphone in the VR glasses. Now put on the VR glasses and start flying.
When operating the VR glasses in connection with the quadrocopter, observe the provisions applicable in
your country.
Additionally, you can take a picture with the quadrocopter camera or start a video recording (figure 15, item 3) on the
display of your Smartphone before or during operation of the quadrocopter by selecting the symbol (see figure 15,
item 2).
You cannot use the app to take serial pictures. The camera is activated when you touch the corresponding
symbol (figure 15, item 2). A picture will be created after releasing the symbol.
Stop video recording by selecting the corresponding symbol (figure 15, item 3) again.
There is no function button for "photo" and "video" at the transmitter.
h) Viewing pictures or videos
When you have stopped flying, you can view the first pictures or videos on your Smartphone right away. For this,
choose the corresponding symbol on your Smartphone (figure 15, item 4). The following screen appears.
After selecting "Pictures", you can select the saved pictures or videos. Depending on your selection, another screen
content will appear with the saved pictures (or videos). You can open them for viewing by tapping them. To delete
pictures or videos, select the corresponding file (touch it for a longer time) and then following the screen instructions.
Figure 16
61